Processors & Suppliers Standards & Grades USDA grades for natural almonds are voluntary minimum standards. The California almond industry can supply almonds to customers’ unique specifications, both in terms of sizes and grades, based on the intended applications. Download our Almond Technical Toolkit and link here. USDA grades of shelled almonds. Understanding USDA grades. USDA grades establish tolerances for various quality factors. Depending on the ultimate use, different grades may be more relevant than others. Other terms like “Supreme” are also used in the industry when referring to particular grades. Be sure to speak with your supplier about your specifications. The different grades are defined by the allowable minimum standards/tolerances for each grade of almonds. The higher the percentage listed on the chart, the higher the tolerance for that particular grade factor. Almonds are a natural product, so there can be variations within grades and among shipments. For example, while US Fancy cannot have more than 5% dissimilar almonds, depending upon the conditions of that crop year, the actual percentage in the shipment could range from 0 to 5%. PDF Standards & Grades Technical Kit Understanding USDA in shelled grades. More rigorous specifications are typically negotiable to meet customer’s application requirements. U.S. Fancy The highest grade – typically appropriate for products where the visual appeal of the almond is critical to the application. U.S. Extra No. 1 Similar to US Fancy - ideal for food applications where the appearance of the almond is very important. U.S. No. 1 Sometimes referred to as Supreme, and often used for whole almond applications or for further processing like blanching and roasting. U.S. Select Sheller Run Mid-quality grade –good choice for applications where the almonds with minimal sorting/processing can be incorporated with other ingredients; for example, inside a confectionery product a higher level of chipped and scratched kernels is accepted. Also appropriate for further processing, such as blanching, grinding, roasting, dicing and slicing. U.S. Standard Sheller Run Good grade for further processing, such as blanching, dicing, grinding or paste, particularly where a higher level of split and broken kernels is not a concern. USDA grading parameters. The following is the breakdown of parameters that affect the grading for almonds, regardless of the variety or size. Dissimilar Different varieties of almonds in one load. Used for whole almond applications or for further processing, such as blanching and roasting. Doubles Two kernels developing in one shell. One side of a double kernel is flat or concave. Chip & Scratch Loss of kernel skin as a result of mechanical processing. Greater than 1/8" (3.2 mm) in diameter, is defined as injury; if affecting, in aggregate, greater than 1/4" (6.4 mm) in diameter, it is defined as defect. Foreign Material Pieces of shell, hulls or other foreign matter that will not pass through a round-opening screen measuring 8/64" (3.2mm) in diameter. Particles & Dust Fragments of almond kernels or other material that will pass through a round-opening screen measuring 8/64" (3.2 mm) in diameter. Split & Broken Seven-eighths or less of complete whole kernels that will not pass through a round-opening screen measuring 8/64" (3.2 mm) in diameter. Other Defects Any defect that materially detracts from the appearance of the almonds. The defects include gum, shrivel, brown spot and discoloured. Serious Defects Any defect that makes a kernel or piece of kernel unsuitable (includes decay, rancidity, insect injury and damage by mould). Understanding USDA in shell grades. U.S. No. 1 Similar varietal characteristics. Free from loose, extraneous and foreign material. Shells are clean, fairly bright, fairly uniform in colour and free from damage caused by discolouration, adhering hulls, broken shells or other means. Kernels are well dried, free from decay, rancidity, damage caused by insects, mould, gum, skin discolouration, shrivelling, brown spots or other means. Loose Foreign Material 2%, including 1% passing through a 24/64" (9.5 mm) screen (this is also by weight). Internal Defects 10%, including 5% serious damage. U.S. No. 1 Mixed US No. 1 grade, except that two or more varieties are mixed. U.S. No. 2 Consists of almonds in the shell that meet the requirements of US No. 1 grade, except that an additional tolerance of 20% shall be allowed for almonds with shells damaged by discolouration. U.S. No. 2 Mixed Consists of almonds in the shell that meet the requirements of US No. 2 grade, except that two or more varieties of almonds are mixed. Size Unless otherwise specified, 28/64" (11 mm) in thickness. Find a Supplier Find a supplier or exporter for about any almond product you can think of from shelled bulk to almond paste. U.S. No. 1 is commonly referred to by industry as Supreme. However, Supreme is not a USDA grade. †UOS = Unless Otherwise Specified.